Lift Out Product

Lift Out

Series 30: Slimline framing system usually applied to smaller windows.


Offers a practical solution for treating windows which are rarely opened, but require occasional access for cleaning or maintenance.

Series 30_Section detail

Series 30 Slimline

A slim line lift-out system applied to windows that are rarely used but which need access for cleaning or maintenance. Available in vertical lift or side to shuffle-out options.

Recommended maximum frame sizes (mm)

  H W
Lift Out  1400   1000
Shuffle-Out 1700 600

Glazing Range

4 mm to 6.8 mm

Frame Finishes

Standard white (HIPCA semi- gloss).

Any standard powder paint, wood grain or anodised finish to order.

  • Warmer

    A Series 30 window will reduce heat loss by up to 50% using standard glass and up to 65% with a thermally efficient glass (low-E). The system is also fitted with a mixture of high performance brush and compression seals to minimise drafts but the design requires single seals at some locations which will reduce efficiency. 

    The effectiveness of the insulation is measured by U-values, the lower the figure the better the insulation.

    INSULATION (U-VALUE) CALCULATED IN COMBINATION WITH A PRIMARY WINDOW AT BRFC SAMPLE SIZE OF 1430X1230MM

    GLASS METAL PRIMARY WINDOW

    TIMBER PRIMARY WINDOW

     4 - 6mm 2.86 W/m2K   2.59 W/m2K
     4 - 6.8mm low-E  1.91 W/m2K  1.79 W/m2K

    Quieter

    A Series 30 window set 100mm apart from the existing window will reduce noise levels by 42dB (decibels).  In some circumstances this will achieve World Health Organisation guidelines for quiet living and working environments.

    NOISE INSULATION MEASURED IN COMBINATION WITH A PRIMARY WINDOW

    GLASS 50MM CAVITY 100MM CAVITY 200MM CAVITY
     4 - 6.4mm  38 dB (Rw)  42 dB (Rw)  44 dB (Rw)
     6.8 mm  39 dB (Rw)  43 dB (Rw)  45 dB (Rw)

     Safer

    The Series 30 window is not designed for security but when fitted with a simple lock and glazed with laminated glass it will provide limited resistance to forced entry.

    SECURITY PERFORMANCE (MAXIMUM ACHIEVABLE, CONTACT SELECTAGLAZE FOR SPECIFICATION REQUIREMENTS)

      TEST STANDARD
    INTRUDER Non certified second barrier to entry
    BLAST N/A
    BALLISTIC N/A
    FIRE N/A
  • Styles available

    Section diagrams

    Series 30 Fixed_section diagrams

    • H1 Integral Finger Pull Series 30H1 Integral Finger Pull
    • L11 Mini Camlock Series 30L11 Mini Camlock
    • L12 Screwlock Series 30L12 Screwlock

    ITEMS FINISHES

    H1 Integral Finger Pull

    Match colour frame

    L11 Mini Camlock

    Silver

    L12 Screwlock

    White

    Black