Vertical Sliding Product

Vertical Sliding

Series 95: High security framing system capable of providing significant levels of intruder resistance and blast mitigation.


Heavy duty spring balances support the weight of the security unit, facilitating ease of operation in all positions.

Series 95_Section detail

Series 95 Security

A high security vertical sliding system capable of providing significant levels of blast mitigation or intruder resistance with equivalence to strong bars and grilles.

Recommended maximum frame sizes (mm), subject to balance capacity

H W
3000  2600

Balance Capacity

Maximum area dictated by standard 50kg balance capacity or 65kg to special order.

Glazing Range

9.5mm to 12mm

Frame Finishes

Standard white (HIPCA semi- gloss).

Any standard powder paint, wood grain or anodised finish to order.

  • Warmer

    A Series 95 window will reduce heat loss by up to 47% using standard glass compositions and up to 65% with a thermally efficient glass (low-E). High performance brush seals will almost eliminate drafts and ensure much greater comfort near the window. 

    The effectiveness of the insulation is measured by U-values, the lower the figure the better the insulation.

    INSULATION (U-VALUE) CALCULATED IN COMBINATION WITH A PRIMARY WINDOW AT BRFC SAMPLE SIZE OF 1430 x 1230MM

    GLASS METAL PRIMARY WINDOW

    TIMBER PRIMARY WINDOW

     9.5 - 12mm  3.00 W/m2K  2.70 W/m2K
     9.5 - 12mm low-E  1.97 W/m2K  1.84 W/m2K

    Quieter

    A Series 95 window set 100mm apart from the existing window will reduce noise levels by 45dB (decibels). This can achieve World Health Organisation guidelines for quiet living and working environments even in quite challenging noise environments.   

    GLASS 50MM CAVITY 100MM CAVITY 200MM CAVITY
     9.5mm  41 dB (Rw)  45 dB (Rw)  47 dB (Rw)
     11.3 - 12.04mm  42 dB (Rw)  46 dB (Rw)  48 dB (Rw)

     Safer

    The Series 95 window has considerable inbuilt strengths. Manual attack tests have been conducted by the Loss Prevention Certification Board using a range of tools to attack both frame and glass over defined periods of time. Resistance against the effects of explosives has been assessed on a specialist Blast Range using a simulated car bomb.

    SECURITY PERFORMANCE (MAXIMUM ACHIEVABLE, CONATACT SELECTAGLAZE FOR SPECIFICATION REQUIREMENTS)

      TEST STANDARD
    INTRUDER LPS 1175 SR1 and SR2
    BLAST ISO 16933 EXV 25
    BALLISTIC N/A
    FIRE N/A
  • Styles available

    Section diagrams

    Series 95_section diagrams

    • H4 Moulded Handle Series 95H4 Moulded handle for Selectaglaze series 95
      H4 Moulded Handle
    • H10 Finger Pull Series 95H10 Finger Pull for Selectaglaze Series 95 High Security secondary glazing
      H10 Finger Pull
    • H24 Locking Actuator Series 95Selectaglaze secondary glazing H24 locking actuator for Series 95 vertical sliding units
      H24 Locking Actuator

    ITEM FINISHES

    H4 Moulded Handle

    H10 Finger Pull

    H24 Locking Actuator

    Match frame colour